End-Scan Using the End Wall

How to perform the end-wall end scan. Back to VTube-LASER

Why the End-Scan technique is important

This end-scan method is useful for increase in precision over the scissor method. We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube. We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

Align the scanner at the end wall of the tube. Press the green button until VTube-LASER is finished scanning all the end stripes.

Another Way to Use This End-Scan Technique

The advantage of this method is that it is less prone to outlier points.

The disadvantage is that it is hard to aim at thinner walls.

Align the scanner so that it touches one end wall of the tube. Press the green button until VTube-LASER is finished scanning all the end stripes.

Other Pages

• Go to End-Scan Using the End Wall
  
  
• Go to End-Scan Using End Targets
  
  
• Back to VTube-LASER