Use Bend Count For Machine Lube
From ATTWiki
Contents |
What is It?
This property is a switch that instructs CNC Processor to use the bend count rather than the part count for machine lube start event.
Value
The value is set to 0 or 1 like this:
Use Bend Count For Machine Lube= 0
or
Use Bend Count For Machine Lube= 1
If the value is set to 1, then it is activated, and Lube Machine At Bend Count property will be used to set the event for the machine lube.
--Mcone 23:40, 19 July 2006 (EDT)
