Set the Number of Values Beyond the Decimal for VTube
From ATTWiki
|
|
|
Step 1 - Clear Project
Press the Clear Project button in the toolbar.
Step 2 - Enter System Options
Press the System Options button in the toolbar.
Step 3 - Enter System Options
Press the Math Setup tab, then the Decimal tab.
Step 4 - Change the Decimal Setup
Press the Math Setup tab, then the Decimal tab.
Step 5 - Switch to the Project Setup Tab
Change to the project setup tab and press the Set Project Default button the new default for clearing VTube.
Setup Complete
Now, whenever VTube is cleared for a new project, the new decimal places setup will take effect.
Other
- Back to VTube-LASER
- Back to VTube-PRO
- Back to VTube-STEP
- See the VTube Software Maintenance Plan page
