VTube-LASER v1.80

Revision 1.80 Back to VTube-STEP Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER

• See VTube-LASER Customer Support Page to download the latest version.

New Transform MASTER Centerline Data so Any Bend is True in the XY Plane

• Transform the centerline orientation so that any bend is true.
• The 0,0,0 datum is always placed at the center of the true bend radius.
• This feature can be combined with the Excel output in order to automate the building of compound tools in solid model programs.

Before transformation:

After transformation with bend 1 true to the XY plane:

End Trim Length Fix

• For single bends in the inspection grid, the end trim lengths were 1/2 the correct value. VTube-LASER was incorrectly considering single bends as single straight parts. This is corrected.
  

Updated Hardware Key Driver

• The latest version of the SafeNet hardware key driver is included in this installation.
  

Other Changes

• Removed the dashes from radius zeros in XYZ charts.
• Added new "XYZ" report that includes only the XYZ data for use in importing XYZ data to solid model programs like Autodesk Inventor through Excel.

Other Pages

• Back to the VTube-LASER page
• See VTube-LASER Customer Support Page to download the latest version.