CNC Bender v12-20120723

v12-20120723 Back to CNC Bender Software Updates To download the update see the support page.

Radius Level Shift Command Names Simplified

The command names for the radius level shifting were often confusing when moving from HEAD shifters to CARRIAGE shifters. For example, on a head shift machine, AllUp meant radius 1. On carriage shift machine, AllUp meant the top radius (2 or 3). This ambiguity is cleared up by naming the directional valve positions by RADIUS LEVEL number, rather than "UP" or "DOWN". These are the new DEFAULT command names to use: Shift to Radius Level 1 Shift to Radius Level 2 Shift to Radius Level 3 Shift to Radius Level 4 Shift to Radius Level 2 From 1 Shift to Radius Level 2 From 3 Shift to Radius Level 3 From 2 Shift to Radius Level 3 From 4

Radius Level Shift Command Names Can Be Changed

The radius level COMDEF names can be configured to custom names in the Low Level COMDEF Names Cross Reference menu.

Changed the Name of "Low Level Options List" to "Setup Options List"

The Options List tab has been renamed.

Other Changes

RECAPTURE ERROR RESOLVED: Previous versions of CNC Bender would show a collision error in recapture mode when the PDA is motion controled. The resolution was to separate the PD return from the PDA return COMDEFs.

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender General Information
• See Teach Mode
• See Custom Commands