CNC Bender v12.4

v12.4 - October 7, 2013 Back to CNC Bender Software Updates See CNC Bender Customer Service Page for an update.

ENHANCED: Benderlink

DOCS software may send a changed rotation direction which could crash a bender during correction. CNC Bender Benderlink intercepts this condition and automatically corrects the direction if rotatio data is already programmed into the control. The problem especially occurs around the 180 degree rotation area. The Compare Data tab is now the first one to display when entering Benderlink from Tube Shape.

ENHANCED: Extended Timing Control for Servo Modules

The SMT operator stations now process data more quickly than in earlier modules. This version of CNC Processor now more carefully governs the timing of all data sent to the servo modules.

[[image:Momentum.jpg]|300px]

ENHANCED: Direct Axes Jog Button and Image

The Direct Axis jog button and large LED image were redesigned so that the button will not overcome the paint event of the LED image.

Other Changes

Repaired form repaint issue in the Low Level menu.

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender Customer Service Page for an update.
• See CNC Bender General Information
• See Teach Mode
• See Custom Commands