VTube-LASER v1.99

Revision 1.99 Back to VTube-STEP Back to VTube-STEP Revisions Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER See VTube-LASER Customer Support Page to download the latest version.

NEW: Alpine M4 Bender Correction

The Alpine M4 bender format was added to VTube-LASER. This allows VTube-LASER to correct the control in a full bi-directional corrections loop. This new feature also stores all the YBC data in the M4 format inside the VTube project files - which means the bender setup is stored along with the project and recalled when the project is loaded back into VTube.

NEW: CSM M4 Bender Correction

The CSM M4 format was added to VTube-LASER. This allows VTube-LASER to correct the control in a full bi-directional corrections loop. This new feature also stores all the YBC data in the M4 format inside the VTube project files - which means the bender setup is stored along with the project and recalled when the project is loaded back into VTube.

ENHANCEMENT: "Pull Arm from Cradle" Message REMOVED for Automatic Scan Modes

The message is of no value when the arm is running in automatic scan mode. It should only display when the scan algorithm is set to FIXED. This saves confusion for arm users that always use AUTOMATIC modes. So now VTube only displays the message if the scanner is setup in the VTube Project file for FIXED mode.

ENHANCEMENT: Additional Setup Button Added for Winton WMC in Bender Setup

This new button allows users to modify the bender setup file before sending data to the bender.

ENHANCEMENT: Arm Connected LED Lamp Added to Arm Utilties

This new LED indicates that the arm is connected to the Arm Utilities menu.

Other

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER
• See VTube Language Editor