Auto Lube

From ATTWiki

Revision as of 01:10, 13 July 2007 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

The Auto Lube feature automatically pulses an output for a designated number of seconds to lube the machine. The event is triggered after a pre-configured number of bends in the CNCProcessor.cfg file is reached.

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Auto_Lube&oldid=3451"