CRIPPA
| CRIPPA benders are built in Italy and marketed worldwide. Customers report that they like these benders very much. They are often all electric with all actuators servo-controlled.
|
|
Contents |
CRIPPA UII Control software Version 3
|
The CRIPPA Windows software allows for complete programming of bender setup. |
|
CRIPPA UII Control software version EVO II
|
This is the screen from the Evo II generation of Crippa UII software (circa 2017). Changes made by the Supravision communications can be viewed on this page. |
|
|
This is the main screen for the CRIPPA HMI. The UII screen (shown above) is loaded from the bottom toolbar button in this screen. |
|
VTube-LASER Support for Crippa Bender Setup and Corrections
|
VTube-LASER communicates with the newer CRIPPA UII software using the Supravision Network protocol. |
|
VTube-STEP Support for Newer CRIPPA Bender SPF Files
|
For newer benders, VTube-STEP can export Crippa export capability allows for easy export to Crippa UII software. The format is a text file that is compatible with most CRIPPA benders that were released in early 2012 and on. |
|
VTube-STEP Support for Legacy CRIPPA Bender MPF Files
|
For older CRIPPA SIEMENS SINUMERIK benders, VTube-STEP can build MPF files. (As of VTube version 2.7, December of 2016) |
|
Contact Information
CRIPPA USA Distributor
Chris Harrison
Tube Process Technology LLC
4343 SKUSA DR
BRIGHTON, MI 48116
Phone (810) 599-1972
E-Mail: [email protected]
Other Pages
- See VTube-LASER
- See VTube-STEP
- See VTube Communication for CRIPPA MPF for a tutorial on communications setup and use
