Communications Board for Eaton Leonard - CB-EL1

From ATTWiki
Revision as of 14:25, 23 July 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Contents


Cb-el1 array.jpg

This is the Advanced Tubular Technologies communications board designed to communicate with all VELOG, EL-2000, and Premier controls.

Features

There are several features and improvements in this board:


  1. The board requires only a single +5 volt power (The original design requires both +15 volt, -15 volt, and +5 volt power.)
  2. The simplified electronic design allowed for size reduction to 1/3 original size or the standard EL boards.
  3. This board includes LED indicators: Indicates power, transmission, and reception
  4. This board includes built-in current reversal protection. Reversing the power polarity will not destroy the board.
  5. This board uses screw terminals for power connection
  6. The communications connectors are easy-to-use RJ45 receptacles
  7. The board is certified RoHS compliant (no lead solder)
Retrieved from "http://www.advancedtubular.wiki/index.php?title=Communications_Board_for_Eaton_Leonard_-_CB-EL1&oldid=3527"