CNC Bender v15.9.7
From ATTWiki
v15.9.7 - January 17, 2018
|
|
POSTBEND CHUCK CLOSE SKIP CHANGE
|
The POSTBEND CHUCK CLOSE SKIP is now independent from the PREBEND CHUCK CLOSE SKIP. PREBEND would always override the POSTBEND setting. This has been changed so that the POSTBEND setting is independent of the PREBEND. |
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender General Information
- See Teach Mode
- See Custom Commands
