Copy a default VTube configuration to another computer with VTube

Back to VTube-STEP
Back to VTube-LASER

WARNING!

It is ok to copy a configuration from VTube-LASER to a computer with VTube-STEP as long as the program versions are the same.

However, if the source and target computers are not running the same version of VTube, then there is a chance that the VTube target computer that receives the new setup will not load the new configuration files. Click in the top toolbar on the Information button to check the current version.

Steps to copying a default setup

STEP 1 Use the toolbar button to clear VTube.
STEP 2 Change the values in VTube to whatever you want them be when you perform a project clear in the future. Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)
STEP 3 Press the System Options button.
STEP 4 Press the Project Setup tab, and then press the Set Project Default State button.
STEP 5 Exit the System Options menu. VTube will now clear to your new default settings when you clear VTube projects.