Explain the Differences Between VTube-STEP and VTube-LASER

From ATTWiki
Revision as of 15:41, 2 December 2021 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-laser logo 1.96.png


Vtube-step logo 2.png

Vtube-laser 1.89 mainscreen.png
Vtube-step-1.89 screenimage.png




Contents

VTube-STEP

VTube-STEP allows you to import solid models, send new bender data to benders, and create reports with bender data. The price for VTube-STEP is $2750 per license*. See VTube-STEP.

VTube-LASER

VTube-LASER is built on top of VTube-STEP. It allows you to measure and qualify tube shapes and correct tube benders. The price for a VTube-LASER license is $11,500*. VTube-LASER was designed from the ground up to be the most powerful tube scanning package in the world. See VTube-LASER.

VTube-LASER Programmer

VTube-LASER Programmer is also built on top of VTube-STEP. It is an offline version of VTube-LASER that can do everything that VTube-LASER can do except that it cannot connect to an arm to measure. The advantage of LASER PROGRAMMER compared to STEP for VTube-LASER project setup is that it can also set up measuring parameters at a remote location (VTube-STEP can only import and set the part shape). The current cost is $5750*. See VTube-LASER.


  • The prices are current as of December 2021. They are subject to change.




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Explain_the_Differences_Between_VTube-STEP_and_VTube-LASER&oldid=41749"