FARO
FARO North and South America
FARO Americas is a distributor for our VTube-LASER software in North and South America.
FARO Technologies designs and sells articulated measuring center arms and measuring software that can measure tube shapes.
The company headquarters is in Lake Mary, Florida.
FARO North and South America - VTube-LASER Skill Set
- VTube-LASER Demo: Yes
- VTube-LASER Sell: Yes
- VTube-LASER Train: No (Training handled by Advanced Tubular Technologies, Inc.)
- VTube-LASER Tech Support: No (Support handled by Advanced Tubular Technologies, Inc.)
Contact
FARO Technologies Inc.
125 Technology Park - Lake Mary, FL 32746
(800) 736-0234 - (407) 333-9911
FARO UK
FARO UK is an authorized distributor for our VTube-LASER software in the United Kingdom.
The UK division is equipped to sell VTube-LASER, and has expert staff trained in the use of VTube-LASER. They are able to support and train customers in the UK.
FARO UK - VTube-LASER Skill Set
- VTube-LASER Demo: Yes
- VTube-LASER Sell: Yes
- VTube-LASER Train: Yes
- VTube-LASER Tech Support: Yes
Contact
FARO Technologies UK Ltd
9-10 The Cobalt Centre, Siskin Parkway East
Middlemarch Business Park
Coventry, CV3 4PE
England
Hotline: 00800-3276-7253, Direct Dial: 02476 217690
Technical Information
- See how to check the current FARO driver version: Check FARO Driver Version
- See Recommendations for FARO Arms for arm accuracies and scanner types
- See FARO Arm Types for VTube-LASER
- Video from FARO for How to Compensate the Ball Probe in a FARO Quantum S
- OLDER Video from ATT for How to Compensate the older FARO Scanner Drivers (Pre Quantum)
- NEWER Video from FARO for How to Compensate the newer FARO Scanners Drivers
Measuring Software: VTube-LASER
VTube-LASER Tube Measuring Software
VTube-LASER is our tube measuring center solution for tube fabrication shops. It is designed exclusively for measuring tubes - which allows us to fine tune the package for tube shops and keep the package easy to use.
In 2010, we granted exclusive distribution rights to FARO for VTube-LASER in North and South America.
CAM2 Software: Benderlink for FARO
For benders or Benderlink software that use the SVNET protocol
Communications with benders can be performed through VTube-LASER or Benderlink for FARO (for CAM2).
Other Pages
- See VTube-LASER in the knowledgebase
- See the VTube-LASER web page.
- See the Benderlink for FARO web page.
- See the FARO web site.
- See Information on the FARO Version 6 Scanner
