Autobuild

Back to VTube-STEP

This document shows the process of importing a STEP file into VTube-STEP

The files used are .stp files.

Steps to import a .stp file into VTube-STEP

STEP 1 Import a 3D model
STEP 2 Under Parametric Data, choose Autobuild Cylindrical.
STEP 3 Load the desired part into VTube-STEP from the file it is saved in inside file explorer
STEP 4 To collect parametric data, an operator can either autobuild or manually collect features. For Autobuild For Manual Collection

STEP 5 Rebuild Parametric Tube from Collected if manual collection was used
STEP 6 The XYZ and LRA grid will now have parametric data in them. This information can be sent to a bender, or brought into VTube-LASER to be measured against.
Other Pages Back to the VTube-STEP page