Benderlink for MiiC
Benderlink for MiiC is designed to communicate with MiiC benders that have been fitted with the MiiC legacy protocol called "MiiC BSC." (MiiC benders do not come with the protocol installed. They require on-site installation by a MiiC technician.)
Handling Data
Import File Formats
- Benderlink for MiiC (Advanced Tubular format)
- Supravision File (Romer/Cimcore format)
These files can be loaded through menu commands or using drag and drop of files.
What About XYZ and Bender Data in SV?
- YES to BOTH - if they are present. The Supravision file format can have either XYZ data or BENDER data or BOTH. MiiC can transfer both sets of data. XYZ is not needed to operate the bender - only the PRB data. However, some customers rely on XYZ data as a revision cross-check. If Benderlink for MiiC finds XYZ data in the Supravision file, then it will import the XYZ data.
Any other data in SV format?
- The SV file format also includes other items that may be in the file. For example, the part number, the tube diameter, the tube length are all usually in the file. This data is imported into Benderlink for MiiC also.
What happens at import of the Supravision Data File?
- When Benderlink for Miic imports the Supravision data, a conversion to the MiiC bender format is automatic. This allows the operator to view, further edit, and then send the imported data directly to a MiiC bender.
Benderlink for MiiC Format
- Benderlink for MiiC also has our own file format designed for storage of all the data on the MiiC control. (The Supravision file format will not save all options in the MiiC data - only the basics listed above.)
Tubecad Supravision File Output Sample
- Click here to download a sample SUPRAVISION file created by TubeCAD Pro. Use it to test conversion to other software that read Supravision files.
Benderlink for MiiC Laservision Support
Laservision is an Eaton Leonard measuring center. Benderlink for MiiC now supports LASERVISION for communications to MiiC benders using the MiiC BSC protocol.
MiiC bender data storage - using Benderlink for MiiC to Replace Aging Tape Drives
There's nothing intrinsically wrong with MiiC tape drives. However, they, like all electromechanical devices, wear out over time. Customers say that they are not easily replaced with the new tape drives as the tape drives are becoming more difficult to find. The MiiC benders are outlasting the MiiC tape drives.
Our customers are using our Benderlink for MiiC software to solve the problem of the aging tape drives. Benderlink for Miic is excellent for data storage. The data that is transferred from the MiiC is stored on the computer hard drive.
In one application we installed, there are four MiiC benders connected through wireless connection to a central Benderlink computer. The customer sends Supravision files created by Tubecad to a central location on the network. The MiiC operators then import the Supravision data into Benderlink for MiiC, then send the new data out to one of the four MiiC benders.
After the program is completely setup (with wedges and options), the operator then uses Benderlink for MiiC to transfer the final setup to the disk of the Benderlink computer.
More Information
More information about Benderlink for MiiC can be found at The Advanced Tubular website
