Revision: Benderlink for Chiyoda/Keins 5.85

From ATTWiki
Revision as of 11:35, 5 December 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Check.jpg New Drawing Number & Filename Synchronization

Benderlink now asks if the internal drawing number should be reset to be equal to the channel filename.



Read the details below.




HOW IT WORKS

    STEP 1


    Press the File Data button in the main menu

    Benderlink namesync 1.jpg

    STEP 2


    Choose Save Data to File for a single channel

    Benderlink namesync 2.jpg


    STEP 3


    Type a new filename for this channel data

    Benderlink namesync 3.jpg

    STEP 4


    Press Save

    Benderlink namesync 4.jpg

    STEP 5


    Press the green CHECK MARK button to close and continue

    Blink chiyoda recalculate incoming lra greenbutton.jpg

    This closes the window, replaces the radii values, then performs a new XYZ to LRA calculation.

    Click on the red X button if you want to cancel the selection and calculation.

    STEP 6


    Continue with the conversion of Supravision LRA to Chiyioda/KEINS FPB data

    Blink chiyoda importsv reset.jpg

    STEP 7


    Conversion Message will be displayed

    Blink chiyoda importsv complete.jpg

    The conversion message will be displayed in the log in this menu. The conversion is complete






Retrieved from "http://www.advancedtubular.wiki/index.php?title=Revision:_Benderlink_for_Chiyoda/Keins_5.85&oldid=5279"