Bender to XYZ

Summary

Bender to XYZ is software converts bender data to XYZ coordinates that represent the centerline of a tube shape.

Date Released

Version 5 was released on July 1, 2008.

Bender Formats Converted

If you have bender data in any of these formats, you can calculate back to XYZ coordinates in space.

Bend Data Type	Description
LRA, YBC (Eaton Leonard), FPB (Chiyoda), FRB (Advanced Tubular), PRB (MiiC)	Standard CNC Draw Bender. Draw bending is where the tube is "drawn" around a rotating bend die. The opposite of draw-bending is compression-bending.
Military 1 or Conrac	Absolute(accumulated) LENGTHs and ROTATIONS and draw-bending
Military 2	This is the same as Military 1 except with compression-bending.
Compression-Bending Applications	Bends that are made by pushing the tube around a stationary bend die with a wiper.

In fact, these are the different bender data type combinations that can be setup in Bender to XYZ:

Screen Images

Image	Description
	New Version 5.0 Interface
	Older Version 4 Interface (for comparison)
	Sample skin - WMP11
	Sample skin - Dark Glass
	Sample skin - Opus
	This is the report preview window. This window is modeless, which means that you can still work in the main screen while this is displayed.
	This is the main screen with the left and right panes collapsed so that only the bender data pane is displayed.

Angular Data Input Possibilities

Bender to XYZ allows for entry of ANGLE data using either a standard floating point format or the "degrees-minutes-seconds" format. Examples of valid entries are:

Angular Entry Type	Example
1 - Decimals	90.51
2 - Degrees-Minutes-Seconds	90d30'30" is converted to 90.51 when the user exits the cell.
3 - Any Combination of Degrees, Minutes, and Second	Any part of the DMS value may be left off and the floating point value will still be calculated properly. For example, all of these are value: 90d = 90.00, or 90d30' = 90.50, or 90d30" = 90.00 (when rounded to two places).

Demo Version

You can download an try a demo version that outputs randomized XYZ data. The licensed version (purchased) calculates precise XYZ data. The demo version will clearly display "Demo Version - Randomized Output" in the XYZ pane.

Bender to XYZ Software Updates

Screen Shot	Date Released	Link to Page	New Features
	July 18, 2008	Bender to XYZ v5.3	Added a splash screen. Added a warning screen for when the CUT LENGTH is shorter than any ABSOLUTE LENGTH.
	July 14, 2008	Bender to XYZ v5.2	Added CCW and CW ROTATION direction choice. (CCW = Counter Clockwise, CW = Clockwise) Most benders use the CCW direction with positive angles rotating in that direction when you stand at the front of the bender and look down the tube length.
	July 1, 2008	Bender to XYZ v5	This is a completely new version with too many enhancements to list here. See the update page for details.

Other Pages

• Back to the Conversion Page
• Purchase a license in the Online store