Watch For Machine Lube Complete Input

Watch For Machine Lube Complete Input

What is It?

This is a boolean (on/off) property in the CNCProcessor.cfg file. It is a switch that instructs CNC Processor to watch for an INPUT to energize when the lube event is complete.

Value

The value is set to either 0 (for off) or 1 (for on).

Watch For Machine Lube Complete Input= 1

How to Determine if the System Should Use a Lube Complete Input

Only use this feature if a Lube Complete Input is being monitored on your bender.

WARNING! Using this without a sensor will cause the lube to continue indefinitely.

Other Pages

• Back to CNC Bender Technical Notes
• See Auto Lube for details on how to test the Auto Lube system
• See Configuring Machine Lube Settings
• See CNCProcessor.cfg