Watch For Machine Lube Complete Input

Watch For Machine Lube Complete Input

What is It?

This is a boolean (on/off) property in the CNCProcessor.cfg file. It is a switch that instructs CNC Processor to watch for an INPUT to energize when the lube event is complete.

Value

The value is set to either 0 (for off) or 1 (for on).

Watch For Machine Lube Complete Input= 1

How to Determine if the System Should Use a Lube Complete Input

Only use this feature if a Lube Complete Input is being monitored on your bender.

WARNING! Enabling this feature without an input sensor present on the bender will cause the lube event to continue indefinitely after it has started.

Other Pages

• Back to CNC Bender Technical Notes
• See Auto Lube for details on how to test the Auto Lube system
• See Configuring Machine Lube Settings
• See CNCProcessor.cfg