Revision 2.9.14

Release Date: In development
Current Build: 1

• Back to VTube-LASER
• Back to VTube-LASER Updates
• See also VTube-STEP Updates
• Download updates the Support Page

We discovered a customer that was using Imperial fractional units on a print. So we taught VTube how to accept fraction values in the PART SETUP, XYZ GRIDS, and LRA GRIDS.

The form is the same as the AutoCAD standard. If you know that standard, then you already know the VTube standard.

Acceptable Fraction Forms

• 10-3/8 = 10.375
  
  
• -10-3/8 = -10.375
  
  
• +10-3/8 = 10.375
  
  
• 3/8 = 0.375
  
  
• -3/8 = -0.375
  
  
• 3 / 8 = 0.375 (Spaces are ok)
  
  

Rule Breaker Examples

• 10 3/8 = Error
  
  
• 10-3/0 = Error (division by zero)
  
  

• FIX - In the MASTER and MEASURED tube menus - the EXPORT combo drop down box was fixed so that the current choice is always the type of export that VTube performs.
  
  
• FIX - The RECALL button in Bender Setup now enables properly depending on the communications protocol.
  
  
• FIX - The Coping Print Preview screen does not load into memory during initialization unless it is being used. This prevents potential errors if no printer is installed in your setup.
  
  
• CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts.