Difference between revisions of "VTube-LASER Correction Mapping Tutorial"

From ATTWiki
Jump to: navigation, search
(→‎25pxExample of Skipping a Row)
(→‎25pxExample of Skipping a Row)
Line 109: Line 109:
 
<br><br>
 
<br><br>
  
−
==[[image:Check.jpg|25px]]Example of Skipping a Row ==
+
==[[image:Check.jpg|25px]]Example of Skipping a Row for An Avoidance Move ==
  
 
<table cellpadding=10 width=1200>
 
<table cellpadding=10 width=1200>
Line 117: Line 117:
 
This is an example of how to skip a row for an avoidance move at the bender.
 
This is an example of how to skip a row for an avoidance move at the bender.
 
<br><br>
 
<br><br>
−
STEP 1: Find the extra avoidance row and set all three map values to "Push Down" in that row.
+
This grid shows the bender data before the OMCG wire bender adds an extra row.
 
</td>
 
</td>
  
 
<td>
 
<td>
−
[[image:vtl_v2.9.18_SetThreeMapsToPushDown.png|800px]]
+
[[image:vtl_v2.9.18_MapExample_Slide1.png|800px]]
 
</td>
 
</td>
  

Revision as of 03:45, 6 March 2019

Vtube-laser logo 1.96.png


Correction Mapping Tutorial

Release Date: February 2, 2019
Current Build: 1


Vtube-laser v2.7 screenshot.png

Contents


About Bender Setup Window Correction Mapping Adds Flexibility to Corrections

Use correction mapping in Bender Setup to move corrections up or down columns and to ignore specific corrections.

This ability is important for certain styles of benders - like SOCO, COMCO, and BendPro - because some users prefer to not use the teach mode to create avoidance moves. This ability allows the corrections to skip data that is used for extra moves or avoidance moves.

Each column of adjustments now has their own color-coded Map column.

  • Yellow indicates that the adjustments were pushed down one row from the cell and downward in the grid.
  • Red indicates that a correction is ignored.
  • Pink indicates the the corrections are pulled up one row from the bottom of the grid.
  • Green indicates that the correction is used.



The Correction Mapping values are stored in the project files and recalled automatically when the project is loaded.

Vtl v2.9.18 BenderSetup CorrectionMappingCloseUp.png

Vtl v2.9.18 BenderSetup CorrectionMapping.png




How to Change Correction Maps

Each Map cell has a dropdown control with choices for controlling the corrections value to its right.

Click on the map three times to choose from the list.

The map choices are applied to the correction values only.

Vtl v2.9.18 BenderSetup CorrectionMappingDropDown.png



Before and After Examples

This screenshot shows before any special mapping is activated.

Vtl v2.9.18 CorrectionsMap Rotations Before.png
This shows a Push Down and its effect on the data in the grid.

Vtl v2.9.18 CorrectionsMap Rotations AfterPushDown.png
This shows "Ignores" and their effect on the data in the grid.

Vtl v2.9.18 CorrectionsMap Rotations AfterIgnore.png



Check.jpgExample of Skipping a Row for An Avoidance Move

This is an example of how to skip a row for an avoidance move at the bender.

This grid shows the bender data before the OMCG wire bender adds an extra row.

Vtl v2.9.18 MapExample Slide1.png



Check.jpgFIX - The Taskbar Icon Now Displays

VTube-LASER users discovered that the taskbar icon did not always display. This has been fixed.

Vtl v2.9.18 TaskbarIcon.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_Correction_Mapping_Tutorial&oldid=39705"