Difference between revisions of "VTube-LASER v2.9.12"
(→Revision 2.9.12) |
(→25pxNEW - MINIMUM CLAMP LENGTH FILTER FOR CORRECTIONS) |
||
| (One intermediate revision by one user not shown) | |||
| Line 134: | Line 134: | ||
<td width=300> | <td width=300> | ||
When the Minimum Clamp filter is active and the filter lengthened a length between two bends, then this warning will display.<br><br> | When the Minimum Clamp filter is active and the filter lengthened a length between two bends, then this warning will display.<br><br> | ||
| − | The dialog allows you to CONTINUE or | + | The dialog allows you to CONTINUE or STOP the send to the bender. |
</td> | </td> | ||
| Line 161: | Line 161: | ||
* FIX - In the MASTER and MEASURED tube menus - the EXPORT combo drop down box was fixed so that the current choice is always the type of export that VTube performs.<br><br> | * FIX - In the MASTER and MEASURED tube menus - the EXPORT combo drop down box was fixed so that the current choice is always the type of export that VTube performs.<br><br> | ||
* FIX - The RECALL button in Bender Setup now enables properly depending on the communications protocol.<br><br> | * FIX - The RECALL button in Bender Setup now enables properly depending on the communications protocol.<br><br> | ||
| − | * FIX - The Coping Print Preview screen does not load unless it is being used. This prevents potential errors if no printer is installed in your setup.<br><br> | + | * FIX - The Coping Print Preview screen does not load into memory during initialization unless it is being used. This prevents potential errors if no printer is installed in your setup.<br><br> |
* CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts. | * CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts. | ||
</td> | </td> | ||
Latest revision as of 18:02, 24 May 2022
|
Revision 2.9.12Release Date: August 20, 2018
|
|
NEW - NOTE LIST in PART SETUP For an UNLIMITED Number of Notes in a VTube Project
|
We received a request for more COMMENT and/or NOTE fields in Part Setup for VTube-LASER and VTube-STEP.
|
|
Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.
|
|
NEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION
|
Splitting a bend into two adjacent half-bends manually is a bit complex. So we added this command to make it easy.
|
|
|
See VTube-LASER Split Bend Feature for details on how to use the Split Bend Measuring feature with high-angled bends. |
NEW - MINIMUM CLAMP LENGTH FILTER FOR CORRECTIONS
|
This new filter is in the new CORRECTION FILTER tab menu in Bender Setup. When the filter limits the length reduction, then a dialog will appear before data is sent to the bender. The dialog will warn you with a message that at least one length correction was limited to the minimum clamp length. |
|
|
When the Minimum Clamp filter is active and the filter lengthened a length between two bends, then this warning will display. |
|
|
|
|
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature
