Difference between revisions of "VTube-LASER v2.9.14"

From ATTWiki
Jump to: navigation, search
(→‎25pxNEW - ENTER FRACTION VALUES for FLOATING POINT in PART SETUP, XYZ GRIDS, and LRA GRIDS)
(→‎25px OTHER CHANGES)
Line 71: Line 71:
  
 
<td width=900>
 
<td width=900>
−
* FIX - In the MASTER and MEASURED tube menus - the EXPORT combo drop down box was fixed so that the current choice is always the type of export that VTube performs.<br><br>
+
 
−
* FIX - The RECALL button in Bender Setup now enables properly depending on the communications protocol.<br><br>
+
−
* FIX - The Coping Print Preview screen does not load into memory during initialization unless it is being used. This prevents potential errors if no printer is installed in your setup.<br><br>
+
−
* CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts.
+
 
</td>
 
</td>
  

Revision as of 14:09, 24 August 2018

Vtube-laser logo 1.96.png


Revision 2.9.14

Release Date: In development
Current Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - ENTER FRACTION VALUES for FLOATING POINT in PART SETUP, XYZ GRIDS, and LRA GRIDS

We discovered a customer that was using Imperial fractional units on a print. So we taught VTube how to accept fraction values in the PART SETUP, XYZ GRIDS, and LRA GRIDS.

The form is the same as the AutoCAD standard. If you know that standard, then you already know the VTube standard.

Acceptable Fraction Forms

  • 10-3/8 = 10.375

  • -10-3/8 = -10.375

  • +10-3/8 = 10.375

  • 3/8 = 0.375

  • -3/8 = -0.375

  • 3 / 8 = 0.375 (Spaces are ok)




Rule Breaker Examples

  • 10 3/8 = Error (no dash between the 10 and the 3/8)

  • 10-3/0 = Error (division by zero)

Vtl v2.9.14 fractions.png





Check.jpg OTHER CHANGES



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v2.9.14&oldid=38347"