Difference between revisions of "VTube-LASER v2.9.14"

From ATTWiki
Jump to: navigation, search
(→‎25pxNEW - VTUBE IS COMPATIBLE WITH THE NEW FARO 8-AXIS USB DRIVER (6.2.0.26))
(→‎25pxNEW - VTUBE IS NOW COMPATIBLE WITH THE NEW FARO 8-AXIS USB DRIVER (6.2.0.26))
Line 75: Line 75:
 
Previous versions of VTube-LASER will not read the ball probe values with this new driver.<br><br>Version 2.9.14 was changed to work with this new FARO driver. In fact, this FARO driver is highly recommended as long as you have this version of VTube-LASER or newer.<br><br>
 
Previous versions of VTube-LASER will not read the ball probe values with this new driver.<br><br>Version 2.9.14 was changed to work with this new FARO driver. In fact, this FARO driver is highly recommended as long as you have this version of VTube-LASER or newer.<br><br>
 
You can download this latest FARO driver from this [https://www.advancedtubularsupport.com/faro-arm-drivers.html support page.]
 
You can download this latest FARO driver from this [https://www.advancedtubularsupport.com/faro-arm-drivers.html support page.]
 +
</td>
 +
 +
<td>
 +
[[image:faro-quantum-m-scanner.png|400px]]
 +
</td>
 +
 +
</tr>
 +
 +
</table>
 +
 +
<br><br>
 +
 +
 +
==[[image:Check.jpg|25px]]FIXED - REPAIRED A BUG in CUT PLANE STORAGE) ==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
We discovered that, when you delete the entire list of Cut Planes, VTube-LASER will always bring at least one of them back.<br><br>
 +
This has been fixed.
 
</td>
 
</td>
  

Revision as of 20:22, 28 August 2018

Vtube-laser logo 1.96.png


Revision 2.9.14

Release Date: In development
Current Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - ENTER FRACTION VALUES for FLOATING POINT in PART SETUP, XYZ GRIDS, and LRA GRIDS

We discovered a customer that had to manually convert Imperial fractional units from a tube print. So we taught VTube how to accept fraction values in the PART SETUP, XYZ GRIDS, and LRA GRIDS.

The form VTube-LASER and VTube-STEP uses is identical to the AutoCAD standard for fraction entry. If you know that standard, then you already know the VTube standard.

Many customers still use inches in data entry. If you do, then try this after you install this new version: Go to the Part Setup menu and type in the tube diameter using a fractional form. Enter 3/16, 1/4, 3/8, 1/2, 5/8, 3/4, etc. (That's the way we old-school designers and engineers still think.)

Acceptable Fraction Forms

"10-3/8"converts to10.375
"-10-3/8"converts to-10.375
"+10-3/8"converts to10.375
"3/8"converts to0.375
"-3/8"converts to-0.375
"3 / 8"converts to0.375



Rule Breaker Examples

  • 10 3/8 = Error (no dash between the 10 and the 3/8)

  • 10-3/0 = Error (division by zero)

Vtl v2.9.14 fractions.png




Check.jpgNEW - VTUBE IS NOW COMPATIBLE WITH THE NEW FARO 8-AXIS USB DRIVER (6.2.0.26)

Previous versions of VTube-LASER will not read the ball probe values with this new driver.

Version 2.9.14 was changed to work with this new FARO driver. In fact, this FARO driver is highly recommended as long as you have this version of VTube-LASER or newer.

You can download this latest FARO driver from this support page.

Faro-quantum-m-scanner.png




Check.jpgFIXED - REPAIRED A BUG in CUT PLANE STORAGE)

We discovered that, when you delete the entire list of Cut Planes, VTube-LASER will always bring at least one of them back.

This has been fixed.

Faro-quantum-m-scanner.png



Check.jpg OTHER CHANGES



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v2.9.14&oldid=38367"