Revision 2.9.14

Release Date: In development
Current Build: 1

• Back to VTube-LASER
• Back to VTube-LASER Updates
• See also VTube-STEP Updates
• Download updates the Support Page

We discovered a customer that had to manually convert Imperial fractional units from a tube print. So we taught VTube how to accept fraction values in the PART SETUP, XYZ GRIDS, and LRA GRIDS.

The form VTube-LASER and VTube-STEP uses is identical to the AutoCAD standard for fraction entry. If you know that standard, then you already know the VTube standard.

Many customers still use inches in data entry. If you do, then try this after you install this new version: Go to the Part Setup menu and type in the tube diameter using a fractional form. Enter 3/16, 1/4, 3/8, 1/2, 5/8, 3/4, etc. (That's the way we old-school designers and engineers still think.)

Acceptable Fraction Forms

Rule Breaker Examples

• 10 3/8 = Error (no dash between the 10 and the 3/8)
  
  
• 10-3/0 = Error (division by zero)
  
  

Previous versions of VTube-LASER will not read the ball probe values with this new FARO USB driver.

Version 2.9.14 was changed to work with this new FARO driver. In fact, this FARO driver is highly recommended as long as you have this version of VTube-LASER or newer.

You can download this latest FARO driver from this support page.

We discovered that, when you delete the entire list of Cut Planes, VTube-LASER will most likely bring at least one of them back. (They are not cleared permanently.)

This has been fixed so that cleared Cut Planes never reappear.

VTube-LASER can now report absolute CONRAC bender corrections using new HTML report template values.



The two new tokens to use inside the html tags are:

• <vtube_val>Array_Lcor_Absolute</vtube_val>
• <vtube_val>Array_Rcor_Absolute</vtube_val>