Difference between revisions of "RDS Versions for ROMER Scanners"

Information about RDS (Romer Data Service) Versions and HEXAGON scanner versions

• Back to VTube-LASER

“RS” refers to “ROMER Scanner”
"RDS" refers to "ROMER Data Service"

The RDS versions are listed from newest to oldest.

1. RDS 6.2.1 is tested and works well. Download from our support site
2. RDS 6.2.0 is tested and works well. Download from our support site
3. RDS 5.3.0 is tested and works well. Download from our support site
4. RDS 5.2.0 is tested and works well.
5. RDS 5.0.0 is tested and works well. This version is required for the 8-series of the HEXAGON Absolute Arms.
6. RDS 4.2.3 is tested and works well.
7. RDS 4.2.2 is tested and works well.
8. RDS 4.2.1 is tested and works well.
9. RDS 4.2.0 or newer should be used for scanner versions RS2, RS3, RS4, and RS5

NOTE: The RS1 scanner requires RDS 4.0 or 4.1 – but not newer.

This scanner is for the RA8 7-axis arms only. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe.

This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe.

• RA7 7-axis Portable Arms with RS4 Scanners

• CMS108 Scanners

• HP-L-20.8
  
  
• RA7 and RA8 Portable Arms with HP-L-8.9 scanners
  
  This scanner is for attachment of a scanner on the same arms that use Tube Shaper software. See the ROMER HP-L-8.9 website
  
  
• For use on 6 axis arms.

• Leica Absolute Scanner for Long Distances
• The LR model can measure a 10 meter volume.
• The MR model can measure a 20 meter volume.
• YouTube video of LAS

All ball probe systems on devices that run through RDS are compatible with VTube-LASER.