Difference between revisions of "Cable Spec 1"

From ATTWiki
Jump to: navigation, search
(Spec for RJ-45 to DB-9 Converter)
Line 1: Line 1:
 
==Spec for RJ-45 to DB-9 Converter==
 
==Spec for RJ-45 to DB-9 Converter==
 
<br>
 
<br>
This is the original RJ-45 to DB-9 conversion spec.  It is good for all applications except Benderlink Ethernet Modules with the CB-EL1 current loop board.
+
This is the original RJ-45 to DB-9 conversion spec.  It is good for all applications except Benderlink Ethernet Modules with the CB-EL1 current loop board. <br><br>
<br><br>
+
 
Use DB-9 female for connection to standard male COM ports.
 
Use DB-9 female for connection to standard male COM ports.
  
Line 93: Line 92:
 
<br>
 
<br>
 
The DCD Yellow (RJ45 Pin 6) connection was added on July 4, 2014.  It is necessary for a connection to connector cable spec 40 for connection to the MiiC benders.  (See [[Cable Spec 40 - RJ45-DB25 MiiC Pinout]])
 
The DCD Yellow (RJ45 Pin 6) connection was added on July 4, 2014.  It is necessary for a connection to connector cable spec 40 for connection to the MiiC benders.  (See [[Cable Spec 40 - RJ45-DB25 MiiC Pinout]])
<br><br>'''Please be sure to include DCD Yellow in all Cable Spec 1 adapters.'''
+
'''Please be sure to include DCD Yellow in all Cable Spec 1 adapters so that we can assume that they will work with MiiC benders.'''
  
 
==Label==
 
==Label==

Revision as of 16:21, 9 December 2017

Contents

Spec for RJ-45 to DB-9 Converter


This is the original RJ-45 to DB-9 conversion spec. It is good for all applications except Benderlink Ethernet Modules with the CB-EL1 current loop board.

Use DB-9 female for connection to standard male COM ports.

Function Wire
Color
RJ-45
Pin
to DB9
Pin
Function
RTS Blue 1 ---- 7 RTS
DTR Orange 2 ---- 4 DTR (+5v)
GND Black 3 ---- 5 GND
TXD Red 4 ---- 3 TXD
RXD Green 5 ---- 2 RXD
DCD Yellow 6 ---- 1 DCD
DSR Brown 7 ---- 6 DSR
CTS Grey 8 ---- 8 CTS



The DCD Yellow (RJ45 Pin 6) connection was added on July 4, 2014. It is necessary for a connection to connector cable spec 40 for connection to the MiiC benders. (See Cable Spec 40 - RJ45-DB25 MiiC Pinout) Please be sure to include DCD Yellow in all Cable Spec 1 adapters so that we can assume that they will work with MiiC benders.

Label

Lable each of these adapters with "ST", which means "Straight Through".

Important Testing Note

The receiving pins in this adapter are prone to jump out of their inserted holes if they are not properly pressed in.

With the plug NOT snapped into the cover, plug the port into a DB9 male port to be sure none of the receiving pins are pressed back out of the inserted holes.



Other Pages