Difference between revisions of "VTube-LASER ROMER RDS Performance Recommendations"
(→ROMER Versions) |
(→RDS Performance Notes) |
||
| Line 37: | Line 37: | ||
When scanning, RDS can take up to 20% of the CPU usage.<br><br> | When scanning, RDS can take up to 20% of the CPU usage.<br><br> | ||
It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses. | It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses. | ||
| + | </td> | ||
| + | <td> | ||
| + | [[image:RDS Popup Menu.png|200px]] | ||
| + | </td> | ||
| + | |||
| + | </tr> | ||
| + | |||
| + | <table width= 900> | ||
| + | <tr cellpadding=10> | ||
| + | <td width=300> | ||
| + | You can watch the CPU usage in the Windows Task Manager.<br><br> | ||
| + | In Windows 10, to display the Task Manager, right click on the task bar at the bottom of the Windows desktop and choose "Task Manager" from the popup menu. | ||
| + | </td> | ||
| + | <td> | ||
| + | [[image:RDS in Task Manager.png|600px]] | ||
| + | </td> | ||
| + | </tr> | ||
| + | |||
| + | |||
| + | |||
| + | </table> | ||
| + | <br><br> | ||
| + | |||
| + | |||
| + | ==RDS Control Panel Setup== | ||
| + | |||
| + | <table width= 900> | ||
| + | <tr cellpadding=10> | ||
| + | <td width=300> | ||
| + | This is how we recommend that you setup the RSx menu in the RDS Control Panel.<br><br> | ||
| + | * Capture mode: Keep button pressed | ||
| + | * Sound guide: Unchecked (OFF) | ||
| + | * Point Sampling: 25% (or the lowest available) | ||
| + | * Behavior when press the left and right buttons: Switch exposure mode | ||
| + | * Exposure mode: Automatic | ||
| + | |||
| + | To change any of these settings, you will need to changed from Standard mode to Advanced mode. Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".<br><br> | ||
| + | If you want to, you can save a custom profile (setup) as something like "VTube-LASER". | ||
</td> | </td> | ||
<td> | <td> | ||
Revision as of 15:57, 18 July 2018
Information about RDS performance with VTube-LASER
|
|
See also RDS Versions for ROMER Scanners
About ROMER RDS
|
ROMER RDS is a driver system that connects software like VTube-LASER to any ROMER arm that uses the RDS driver. See this page for details all the different arms that RDS can connect VTube-LASER to: |
RDS Performance Notes
|
When idling, the RDS service requires only 1 to 5 percent of the CPU usage. |
|
|
You can watch the CPU usage in the Windows Task Manager. |
|
RDS Control Panel Setup
|
This is how we recommend that you setup the RSx menu in the RDS Control Panel.
To change any of these settings, you will need to changed from Standard mode to Advanced mode. Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced". |
|
|
You can watch the CPU usage in the Windows Task Manager. |
|
ROMER Ball Probe Support
|
All ball probe systems on devices that run through RDS are compatible with VTube-LASER. (VTube-LASER can use the LASER or the ball probe.) |
ROMER Versions
|
RDS 4.2.1 and 4.2.2 work well. v4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces. |
How to Determine Your Current RDS Version
|
Left click on the System Tray icon. |
|
|
Right click on the measuring center icon. |
|
|
Left click on About. |
|
|
The RDS About window will display. |
|
Other Pages
- Back to VTube-LASER
