Revision as of 21:32, 16 November 2018

Revision 2.9.17

Release Date: Unreleased
Current Build: 2

VTube-LASER now handles point clouds in storage we call "buckets." This allows you to scan anything into VTube-LASER - not just tubes.

With this feature:

Scan point clouds into list of point cloud buckets using the LASER scanner.
Turn buckets of points on our off.
Select points on the screen then press DELETE to delete them from the buckets.
Measure the distance between any two points.
Transfer the point clouds into SOLIDWORKS.
Transfer the point clouds into an ASCII file for use in any other program.
Point clouds are stored and recalled to/from the VTube-LASER project file.
Point cloud changes are stored in the UNDO memory. If you delete the wrong set of points - just press UNDO.
Set the color of each bucket of point clouds.

We fixed a bug that prevented data that was recalled from the bender from being transferred to the Additional Data menu.

@@ Line 47: / Line 47: @@
 <td>
 [[image:vtl_v2.9.17_PointCloudDimension.png|800px]]
-</td>
-</tr>
-</table>
-<br><br>
-==[[image:Check.jpg|25px]]New - Import the EL Premier TOOL setup to VTube-LASER Bender Setup==
-<table cellpadding=10 width=1400>
-<tr valign=top>
-<td width=300>
-Using the current tool setup at the EL Premier is very helpful - so that you don't have to re-enter the values after a first-time send to the bender. So now you can recall just the tool setup from the Premier in order to keep the current tool setup.
-</td>
-<td>
-[[image:vts_v2.9.16_ELToolImportFromPremier.png|800px]]
 </td>