ROMER Certified Length Bar

From ATTWiki
Revision as of 23:30, 15 January 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Contents

ROMER Certified Length Bar

ROMER Scanner Plus Hex Logo.png



Recommended - But Not Standard

Certified length bars are good for verifying that your arm is working properly.

The standard length bars use the 15mm calibration probe in one of three sockets.

There are three lengths available:

  1. 305 mm
  2. 711 mm
  3. 1016 mm



For most customers that purchase a 2.5 meter arm, the recommended length to purchase with your arm is 711 mm.

ROMERCertifiedLengthBar.png

TKJ Connector

ROMER Absolute Arms utilize a CMM-style kinematic joint, or TKJ type connector.

TKJ connectors allow the probes to be detached and reconnected without calibration regularly.

ROMERTKJConnector.png

HEXAGON ACCESSORIES SITE

You can purchase new probes at the HEXAGON site.

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=ROMER_Certified_Length_Bar&oldid=36413"