VTube-LASER Correction Mapping Tutorial

Correction Mapping Tutorial Release Date: February 2, 2019 Current Build: 1 Back to VTube-LASER Back to VTube-LASER Updates See also VTube-STEP Updates Download updates the Support Page

About Bender Setup Window Correction Mapping Adds Flexibility to Corrections

Use correction mapping in Bender Setup to move corrections up or down columns and to ignore specific corrections. This ability is important for certain styles of benders - like SOCO, COMCO, and BendPro - because some users prefer to not use the teach mode to create avoidance moves. This ability allows the corrections to skip data that is used for extra moves or avoidance moves. Each column of adjustments now has their own color-coded Map column. Yellow indicates that the adjustments were pushed down one row from the cell and downward in the grid. Red indicates that a correction is ignored. Pink indicates the the corrections are pulled up one row from the bottom of the grid. Green indicates that the correction is used. The Correction Mapping values are stored in the project files and recalled automatically when the project is loaded.

How to Change Correction Maps

Each Map cell has a dropdown control with choices for controlling the corrections value to its right. Click on the map three times to choose from the list. The map choices are applied to the correction values only.

Before and After Examples

This screenshot shows before any special mapping is activated.
This shows a Push Down and its effect on the data in the grid.
This shows "Ignores" and their effect on the data in the grid.

Example of Skipping a Row for An Avoidance Move

This is an example of how to skip a row for an avoidance move at the bender. This grid shows the bender data before the OMCG wire bender adds an extra row.

FIX - The Taskbar Icon Now Displays

VTube-LASER users discovered that the taskbar icon did not always display. This has been fixed.

Other Pages

• See VTube-LASER Addata ZModem Communications Protocol for more information.
• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature