CNC Bender v12-20100303
From ATTWiki
|
|
|
Contents |
IMPROVED - Changed the tolerance for "in-position" in motion-controls PDA
|
CNC PROCESSOR: This change allows the servo-controlled PD Assist die to be extended no more than 2 millimeters before the bend arm will allow itself to be returned home. The tolerance is raised from 0.25 mm to 2 mm. CNC BENDER: The tolerance in the manual page is now raised from 0.25 mm to 1 mm. |
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender General Information
- See Teach Mode
- See Custom Commands
