Cable Spec 1

From ATTWiki
Revision as of 18:25, 4 July 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Spec for RJ-45 to DB-9 Converter


This is the original RJ-45 to DB-9 conversion spec. It is good for all applications except Benderlink Ethernet Modules with the CB-EL1 current loop board.

Use DB-9 female for connection to standard male COM ports.

Function Wire
Color
RJ-45
Pin
to DB9
Pin
Function
RTS Blue 1 ---- 7 RTS
DTR Orange 2 ---- 4 DTR (+5v)
GND Black 3 ---- 5 GND
TXD Red 4 ---- 3 TXD
RXD Green 5 ---- 2 RXD
DCD Yellow 6 ---- 1 DCD
DSR Brown 7 ---- 6 DSR
CTS Grey 8 ---- 8 CTS



Testing Note

The receiving pins in this adapter are prone to jump out of their inserted holes is not properly pressed in. With the plug NOT snapped into the cover, plug the port into a DB9 male port to be sure none of the receiving pins are pressed back out of the inserted holes.

Other Pages