VTube-LASER v2.8.3

Revision 2.8.3 Original Release Date: Not Yet Released Latest Build: Back to VTube-LASER Back to VTube Software Updates (for LASER Mode) Download in updates the VTube-LASER Support Page

NEW: Addata ZModem Communications Protocol

We've added an Addata ZModem communications protocol also known as the Addison "Non-Standard Device Interface".

This protocol allows you to setup the COM port configuration to match the configuration at the other end of the serial port connection. Set the protocol to Addata ZModem, then click on the COM port cell to display this COM port configuration dialog. See VTube-LASER Addata ZModem Communications Protocol for more information.

ENHANCED: NUMALLIANCE BENDER OUTPUT

OUTPUTS 180-DEGREE BENDS The NUMALLIANCE CSV export now compresses SPLIT BENDS into a single 180-degree bends during export to the NUMALLIANCE CSV. OUTPUTS SPRINGBACK-COMPENSATED DATA The NUMALLIANCE CSV export now includes springback-compenstation if you choose that option during export.

OTHER CHANGES

DOCS mode import now uses the filename as the Part Number in Tube Specs (rather than the internal DOCS name of "Tube 1"). Some under-the-hood changes were made to parametric calculations.

Other Pages

• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature