VTube-LASER v2.9.17

From ATTWiki
Revision as of 21:32, 16 November 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.17

Release Date: Unreleased
Current Build: 2


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - Scan and Measure Point Clouds

VTube-LASER now handles point clouds in storage we call "buckets." This allows you to scan anything into VTube-LASER - not just tubes.

With this feature:

  • Scan point clouds into list of point cloud buckets using the LASER scanner.
  • Turn buckets of points on our off.
  • Select points on the screen then press DELETE to delete them from the buckets.
  • Measure the distance between any two points.
  • Transfer the point clouds into SOLIDWORKS.
  • Transfer the point clouds into an ASCII file for use in any other program.
  • Point clouds are stored and recalled to/from the VTube-LASER project file.
  • Point cloud changes are stored in the UNDO memory. If you delete the wrong set of points - just press UNDO.
  • Set the color of each bucket of point clouds.

Vtl v2.9.17 PointCloudDimension.png



Check.jpgNew - Import the EL Premier TOOL setup to VTube-LASER Bender Setup

Using the current tool setup at the EL Premier is very helpful - so that you don't have to re-enter the values after a first-time send to the bender. So now you can recall just the tool setup from the Premier in order to keep the current tool setup.

Vts v2.9.16 ELToolImportFromPremier.png



Check.jpg Fix - Eaton Leonard Data Transfer to Additional Setup Window

We fixed a bug that prevented data that was recalled from the bender from being transferred to the Additional Data menu.

Vtl 2.9.16 bendersetup addtionalELdata.png



Other Pages