VTube-LASER Addata ZModem Communications Protocol

From ATTWiki
Revision as of 19:15, 24 May 2017 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

About the Addata ZModem Communications Protocol

The Addata ZModem communications protocol is also known as the Addison "Non-Standard Device Interface".

It allows for ZModem file transfer between VTube-LASER and any bender that complies with this Addata protocol.

Addata ZModem Icon Large.png

Vtube-laser v2.8.3 Addata ZModem Send.png

This protocol allows you to setup the COM port configuration to match the configuration at the other end of the serial port connection. Set the protocol to Addata ZModem, then click on the COM port cell to display this COM port configuration dialog.

Vtube-laser v2.8.3 AddataZModem Benderlink ComSetup.png



Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_Addata_ZModem_Communications_Protocol&oldid=34271"