VTube-LASER v2.9.10

Revision 2.9.10 Release Date: July 1, 2018 Current Build: 7 Back to VTube-LASER Back to VTube-LASER Updates See also VTube-STEP Updates Download updates the Support Page

NEW - HERBER Bender Corrections Support

We added and tested HERBER MES file correction support that allows VTube-LASER to correct HERBER benders through a network connection.

NEW - VTUBE-STEP MODE AUTOMATIC NEGATIVE STRAIGHT FIX DURING PARAMETRIC REBUILD

(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.) Models with a 180-degree or greater bend angles can often create a very small negative straight distance value. We've added this feature to allow you to detect and fix this situation automatically by injecting a value of zero where there are negative straights. Pressing YES will change the shape of the part. However, if the negative straight is very small, then changing the shape will have no significance and will create a part that is close enough to the nominal to still be a good shape for use as MASTER data. This feature also allows you to skip the fix by pressing "NO." If you do this, then you can still manually adjust the radii to smaller values after the rebuild. Of course, if you skip this fix, then VTube may have trouble generating the diameter - and may even generate and display a program error that you can usually bypass.

FIX- CONSTRUCT TUBE FEATURE WORKS AGAIN

A customer discovered that the Construct Tube feature was not working in the previous version due to changes in the measuring code logic. We fixed the broken code in this version.

FIX- VTUBE-STEP MODE COLLECTION SELECTION ISSUE

(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.) We found issues with the collected objects in VTube-STEP mode. For example, the selected collected object (see the orange object) would never delete from the screen - even if the operator selected it and pressed delete. This issue could cause index errors in the Collection Features list memory displayed in the grid. The Collection Features Grid would not update automatically after a delete of the models on the screen. All of these issues have been fixed.

OTHER CHANGES

VTube-LASER will stop a Construct Tube process with ROMER arms if the LASER mode is active. It will also issue a warning to turn the LASER off. The laser stripe data is now displayed on the screen with lines between the points. This feature makes the stripes much easier to see on the screen.

Other Pages

• See VTube-LASER Addata ZModem Communications Protocol for more information.
• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature