VTube-LASER v2.9.18

Revision 2.9.18 Release Date: March 8, 2019 Current Build: 16 Back to VTube-LASER Back to VTube-LASER Updates See also VTube-STEP Updates Download updates the Support Page

NEW - AUTOMATIC LASER SEPARATION Method for UniScan Mode

The NEW AUTOMATIC LASER SEPARATION method allows VTube-LASER to automatically control the UniScan separation distance between laser stripes based on the known MASTER tube length. This allows VTube-LASER to lay stripes closer on shorter straights to collect more data - while making VTube spread out stripes on longer sections - automatically. This method ensures even distribution of stripes for all lengths in the same tube without changing the laser separation distance on the fly. See the VTube-LASER UniScan Automatic Laser Separation Tutorial for more information.

NEW - Bender Setup Window CORRECTION DATA MAPPING Adds Extreme Flexibility to Corrections

If you have to skip rows for avoidance moves, then this feature is important for you. Use correction mapping in Bender Setup to move corrections up or down columns and to ignore specific corrections. This ability is important for certain styles of benders - like SOCO, COMCO, and BendPro - because some users prefer to not use the teach mode to create avoidance moves. This ability allows the corrections to skip data that is used for extra moves or avoidance moves. Each column of adjustments now has their own color-coded Map column. Yellow indicates that the adjustments were pushed down one row from the cell and downward in the grid. Red indicates that a correction is ignored. Pink indicates the the corrections are pulled up one row from the bottom of the grid. Green indicates that the correction is used. The Correction Mapping values are stored in the project files and recalled automatically when the project is loaded. See VTube-LASER Correction Mapping Tutorial

NEW - Move Bend Setup BLUE COLUMN Data Up or Down

Use this feature combined with Correction Data Mapptin to skip rows for avoidance moves. See VTube-LASER Correction Mapping Tutorial

NEW - BLM CMM Communications Protocol

This protocol allows you to correct BLM benders using the BLM CMM protocol. This is now the recommended protocol for use with BLM benders.

NEW - COMCO CSV Communications Protocol

This protocol allows you to correct COMCO benders through the CSV file import and export.

NEW - OMCG SVNET Communications Protocol

This protocol allows you to correct OMCG benders. See VTube OMCG Bender Correction for details.

NEW - Now VTube has THREE Default Radii

Radius 1, Radius 2, and Radius 3 are now available in Part Setup.

FIX - The Taskbar Icon Now Displays

VTube-LASER users discovered that the taskbar icon did not always display. This has been fixed.

Other Pages

• See VTube-LASER Addata ZModem Communications Protocol for more information.
• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature