CNC Bender

From ATTWiki
Revision as of 23:26, 20 September 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncbender logo.jpg

Cncbender.jpg

Contents


FAQ



Cncbender operatorstation.jpg


Tutorials



Diagnostics

Diagnostic Steps for Master Power On Problems


General Information

Downloads Related to CNC Bender

Download Top Hat Setup Software for Top Hat setup
Download I2T HMI Software
Download Minuteman UPS PowerCenter Software - Uninterruptible Power Supply administrative software


Configuration

About main.axislist file
About CNCProcessor.cfg file

Processlists: Configuring the InitAxes Processlist

Smt two benders.jpg

Version Enhancements


November 6, 2006

  1. CNC Bender 10.0.6.0m - Run Button Cycle Start

  2. CNC Bender 10.0.6.0m - Save Then Update Default Configuration File To Memory

  3. CNC Bender 10.0.6.0m - Set New FRB Rows To User Default

  4. CNC Bender 10.0.6.0m - Tolerance Move Skip

  5. CNC Bender 10.0.6.0m - Smarter Cycle Start Notification

  6. CNC Bender 10.0.6.0m - Cylinder Pressure and Force Calculator

November 6, 2006

  1. CNC Bender 10.0.6.0k - Repair - Radius Checking

November 6, 2006

  1. CNC Bender 10.0.6.0j - Data from Bender File Print Feature

  2. CNC Bender 10.0.6.0j - Rename of CNC Bender Module

  3. CNC Bender 10.0.6.0j - Process List Line Number Errors Feature

  4. CNC Bender 10.0.6.0j - Processor Messages Log Diagnostic Tool

  5. CNC Bender 10.0.6.0j - System Information Log Diagnostic Tool

  6. CNC Bender 10.0.6.0j - Process List Builder Radius Diagnostic Tool

  7. CNC Bender 10.0.6.0j - Enhanced Tool Bar - Process List Editor

  8. CNC Bender 10.0.6.0j - Replaced CNC Loop Timer

  9. CNC Bender 10.0.6.0j - Dynamic Options List Log Moved

  10. CNC Bender 10.0.6.0j - New Log for TCP-IP Errors

  11. CNC Bender 10.0.6.0j - Feed-Bend Die Avoidance Using Machine Length

  12. CNC Bender 10.0.6.0j - Internet Address Setup for Error Message Transmission

  13. CNC Bender 10.0.6.0j - New Prefix Name for Bug Logs

October 27,2006

  1. CNC Bender 10.0.6.0i - SVout Export Feature

  2. CNC Bender 10.0.6.0i - Persistent Clipboard for Keyboard

  3. CNC Bender 10.0.6.0i - Optimized COMDEF and CIO Archiving

  4. CNC Bender 10.0.6.0i - New Error Handling and Logging System

  5. CNC Bender 10.0.6.0i - Replaced Up-Down Buttons

  6. CNC Bender 10.0.6.0i - Combined Logs Menu

  7. CNC Bender 10.0.6.0i - TCP-IP Error Detection System

  8. CNC Bender 10.0.6.0i - TCP-IP Error System Is More Patient

July 17, 2006
Version 10.0.5.9 Released - Axis Enable Delay After Cycle Start is added. This feature delays the moment of ENABLE by a millisecond value in order to give the axis drives time to boot.

May 15, 2006

  1. CNC Bender 10.0.5.7e - Dynamic Correction - This new feature allows for real-time correction and adjustment of the bender for each part.

  2. CNC Bender 10.0.5.7e - New Graphic Window - Now handles bends equal to or greater than 180 degrees

  3. CNC Bender 10.0.5.7e - Auto Dynamic Option Update - Easier automated update process